radiator

Reply Subscribe

Thread Tools

Search this Thread

Mar 6, 2005 | 08:52 PM

IKE

Thread Starter

New User

Joined: Jan 2005

Posts: 21

Likes: 0

radiator

Could someone please give me the width and heigth of the radiator for a 46 V8 1/2 ton? Thanks.
IKE

Mar 7, 2005 | 10:16 AM

mtflat

Lead Driver

Joined: Oct 1999

Posts: 6,782

Likes: 558

From: Kalispell, MT

Width is 22 1/2" then there is a 1 1/4" mounting flange on each side
Height to top of tank is 28"
Thickness is 3" and mounting flange is centered

Mar 7, 2005 | 12:43 PM

IKE

Thread Starter

New User

Joined: Jan 2005

Posts: 21

Likes: 0

mtflat-- Thank you very much for responding with the radiator dimentions.
IKE

Mar 8, 2005 | 02:20 AM

bootie

Senior User

Joined: Jul 2004

Posts: 363

Likes: 0

From: New Zealand

will the radiator out of a 40/41 fit???

Mar 11, 2005 | 02:27 PM

Lazy Hog Farmer

Junior User

Joined: Sep 2004

Posts: 53

Likes: 0

No, they are not interchangeable. I ran into this a while age when I ordered a nice Griffith aluminum radiator for my '40 pickup. It was not even close as I have a 59AB in the '40 and those were late '45-'48 engines. That little fiasco cost me a restock charge and some shipping. Make sure that the one you decide to get matches dimensionally and with mounting holes for the front end sheet metal pieces. You're safe to go with an exact replacement unless you have modified the truck or swapped the engine. Steve