PSP Replacement
Thread Starter
|
Freshman User
Joined: Oct 2004
Posts: 33
Likes: 0
PSP Replacement
Well,,I finally figured out where the grinding noise was coming from,,it's the power steering pump.Anyone help me on how to change it??My truck is a 99 F-350 DWD V-10..I've looked under and see 2 bolts holding it to the block and see one hose pulls off but the other line must unscrew i'm guessing.Also I think it needs to be bled somehow,,
Senior User
Joined: Feb 2002
Posts: 214
Likes: 0
power steering replacement is pretty straight forward. the pressure line needs to be unscrewed, take care not to kink or split the hard line when removing it. bleeding is simply turning the steering wheel lock to lock a few times. depending on where you get the new pump, you may need to switch the pulley. you will prob need a puller for this. im not sure if the pulleys are pressed on with the newer trucks.
eden
eden
Thread
Thread Starter
Forum
Replies
Last Post
