7.3 timing problem
Thread Starter
|
5th Wheeling
Joined: Nov 2003
Posts: 45
Likes: 1
7.3 timing problem
i had my timing checked today and it was pretty advanced 15*. so we got it down to 8.7 and called it good, shut it off picked up and go to start it to leave and the truck runs like crap and barly idles. i put the timing half way between where it was and new and runs better. what would cause the truck to run better way advanced and not good with the timing where it should be?
thanks
thanks
Thread Starter
|
5th Wheeling
Joined: Nov 2003
Posts: 45
Likes: 1
Originally Posted by Spectramac
What kind of timing tool was used?
Mine runs great at 8+*
Mine runs great at 8+*
Thread Starter
|
5th Wheeling
Joined: Nov 2003
Posts: 45
Likes: 1
Originally Posted by PLC7.3
Oh yeah that one, so which hole did you/they put the magnetic pickup in, was a 20* offset dialed in, was the hot engine at 2000rpm steady.?????????
Post Fiend
Joined: Nov 2004
Posts: 5,638
Likes: 1
From: Manitoba
Turn to pax is advanced, turn to driver is retarded. 1/32" = about 4 degrees.
Did you use the upper or lower hole on the timing bracket........supposed to be upper for timing meter probe, the lower hole has a faint line next to it with an (0) there for harmonic balancer alignment with the strobe light.
Did you use the upper or lower hole on the timing bracket........supposed to be upper for timing meter probe, the lower hole has a faint line next to it with an (0) there for harmonic balancer alignment with the strobe light.
Last edited by PLC7.3; Feb 26, 2005 at 11:16 PM.
Thread Starter
|
5th Wheeling
Joined: Nov 2003
Posts: 45
Likes: 1
9
it was the upper one. wow just a 1/32 is 4 degrees. as a pump gets older will it start to retard or advance. i would think as things wear out it would retard the timing. if the timing is to advanced can that lead to damage?
Originally Posted by PLC7.3
Turn to pax is advanced, turn to driver is retarded. 1/32" = about 4 degrees.
Did you use the upper or lower hole on the timing bracket........supposed to be upper for timing meter probe, the lower hole has a faint line next to it with an (0) there for harmonic balancer alignment with the strobe light.
Did you use the upper or lower hole on the timing bracket........supposed to be upper for timing meter probe, the lower hole has a faint line next to it with an (0) there for harmonic balancer alignment with the strobe light.
Trending Topics
Posting Guru
Joined: Oct 2003
Posts: 2,438
Likes: 0
From: Monroe, WA
I just have a 'ghetto' timing setup. A diesel pulse adapter and a regular timing light. I'd be interested to see what kind of reading mine would give. Kinda like a second opinion.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
Post Fiend
Joined: Nov 2004
Posts: 5,638
Likes: 1
From: Manitoba
Mine gets timed ghetto style all the time with no problems.
Regarding the pump getting older and retarding or advancing if the advance ring goes bad maybe, most timing problems would be assiciated with the injectors.
Old weak injectors fire early so overall timing is earlier than original IP set timing.
Regarding the pump getting older and retarding or advancing if the advance ring goes bad maybe, most timing problems would be assiciated with the injectors.
Old weak injectors fire early so overall timing is earlier than original IP set timing.
Last edited by PLC7.3; Feb 27, 2005 at 05:20 PM.
