Newest project
Thread Starter
|
Elder User
Joined: Feb 2003
Posts: 564
Likes: 2
From: Indianapolis IN
Newest project
I just picked up a 1982 Bronco I6 np435 np208 with 66,524 actual miles. I am planning on using it as a daily driver for a few years. I will be putting 33 12.50 15's on, some sort of AT's and remove the top. I need to stop the rust under it any Ideas or recommend products? por 15 is too expensive. The body will be fixed and new paint or maybe Rhino lined.
Any Ideas will be appreciated
Thanks Wayne
Any Ideas will be appreciated
Thanks Wayne
Post Fiend
Joined: Nov 2001
Posts: 5,871
Likes: 0
From: Coutts Canada
Rhino lining would be the way to go, but i would remove the inner fender piece (connects the outer and inner fender) to help keep the fender rusting from the inside out, then rhino line the inner fenders.
Logistics Pro
Joined: Jan 2002
Posts: 3,739
Likes: 3
From: GANS
I don't know if it will 'sweat' but it could trap moisture.
Unless you are going for a mirror finish, I'd get with some implement paint from your local tractor supply. it is cheap, so you can touch it up if you need to.
Unless you are going for a mirror finish, I'd get with some implement paint from your local tractor supply. it is cheap, so you can touch it up if you need to.
