I'm levelling my truck with the 3" from protechezlift next month. I'm also interested in downgrading my wheels to 17's and upgrading my tires to 35's.

For those with a similar set-up, can you post pics or just reply so I can look at your gallerys.

Thanks in advance, Jerry

 

Bump,

OK, to be less specific, anyone who has 33/35" tires and aftermarket rims please post here so I can look at your gallery. Don't really care what type of lift, just looking for some rim/tire ideas.

Thanks, Jerry

 

those weld 6 spokes are awesome! i wish i had 2 grand to spend on wheels.

 

Check out my gallery for some pics and info on my truck

 

I just lifted my 2004 screw with an 8 inch fabtech with 37/13.50x20 toyo m/t for some reason i cant see anybodys pics in the gallery so if you would like to see my pics e-mail me and i would love to send them to you and get feedback thx dvgreen@***.net

 

Thanks for the replies.

Bdyzr1, I was able to pull up your gallery and your truck looks great.

Johnnyboy04, looks like we have the same truck with just a few minor differences. Thanks for posting. If you don't mind, how much did your rims/tires run you and do you have any dealer you would recommend. Also, off topic but what type of exhaust are you running.

Thanks, Jerry

 

I bought my wheels and tires at BigO Tires because the people there were really friendly. They cost me 1700 mounted and balanced. I probably could have done better by getting them online but I wanted to get the rotations etc.

The exhaust is a flowmaster 50 series. It sounds great.

 

Thanks again Johnnyboy04

 

I have a daystar 2 1/2, Nitto 325/60 18 and Helo Maxx 6 wheels...I need a better pic after I was her this weekend, but there is one on there for now.

 

Well Johnnyboy you just helped me finalize my decision on what tires and rims I am getting, I love the looks of your truck

 

Johnnyboy,

One more question, did you get the polished or chrome rockers. Kinda hard to tell in teh pics.

 

Bdyzr1: Your truck looks sweet! I can't wait to add 6" to mine!

 

SoCal, In your gallery you said you had to "trim a little in the front". What do you mean by that?

 

SoCal, how much was your set-up and where did you get it? Thanks

 

bdyzr1 when did fabtech come out with a 8" lift because i can't find it. I think it's 6" lift you have and how did you get 37x13.5r20 on a 6" lift my truck is going to be lifted 8" with cst suspenion and they said 37x13.5r20 would rub at full turn write back to tell me how you did it.
good luck lifted.