ignition help
Senior User
Joined: Jun 2004
Posts: 147
Likes: 0
From: Alaska
replacing the ignition switch is relatively quick and easy it one nut on the back a wire connecter. the locking cylinders on the doors are a little harder though when i did mine it took about 40 minutes a door but i have never done them before.
Senior User
Joined: Jun 2004
Posts: 147
Likes: 0
From: Alaska
your ignition switch in the column didnt read that part sorry. then you need to remove the collar and to do that i beleive you need to remove the steering wheel also then it is all a mater of pulling the pin that the switch is hooked to for a return to the run postion and unhooking it. it will just take a little longer.
Last edited by arcticoffroadingfish; Feb 21, 2005 at 11:07 PM.
