351 Upgrade Question
Thread Starter
|
Freshman User
Joined: Aug 2004
Posts: 36
Likes: 0
From: Latrobe, Pennsylvania
351 Upgrade Question
Hey Guys, I have a 1978 Ford Bronco with the 351 M in it. I have an edelbrock cam, timing set, intake manifold and I am putting a holley carb on it. I was also looking into installing Ford Racing aluminum roller rockers. The ones I am looking at are found at the following web site. Are there any problems in putting these on? Do I have to get an install kit or anything or will they bolt right on? And will they really improve anything performance wise?
Any comments are welcome, and Thanks
http://store.summitracing.com/default.asp?target=partdetail.asp&part=fms%2Dm6564 c351&FROM=MG
Any comments are welcome, and Thanks
http://store.summitracing.com/default.asp?target=partdetail.asp&part=fms%2Dm6564 c351&FROM=MG
Hotshot
Joined: Jul 2002
Posts: 14,285
Likes: 12
From: Bend,OR
first i wouldnt install that holley. they arent known for being a good offroad carb. they flood easily and blow powervalves alot. now for the rockers, i dont think your going to gain anything really from these. a 351m isnt a hi rev motor anyways so i think your best to spend your money elsewhere. you might ask in the 351m/400 motor forum for a better answer.
good luck
good luck
