Can not find map sensor?
Can not find map sensor?
Postmaster
Joined: Dec 2003
Posts: 2,864
Likes: 0
From: STEPHENVILLE,TX!!!!!
here it is
http://community.webshots.com/photo/...36333871IoRhNf
see the rubber line that has the tee in it, follow that up to the black box and your there
http://community.webshots.com/photo/...36333871IoRhNf
see the rubber line that has the tee in it, follow that up to the black box and your there
Postmaster
Joined: Dec 2003
Posts: 2,864
Likes: 0
From: STEPHENVILLE,TX!!!!!
thats the where i tee'd in for my boost gauge, i had a plastic one in there but it kept blowing off. i replaced the bailing wire for hose clamps on it also. my regulator is in there now, i just put a 1/4npt nipple in one side of the tee and spun my regulator on that then put the barb on the map side. i just used the speedaire micro regulator off a shop air compressor. got it set so 40 psi of actual boost the map sees 25, since im still runnin stock head studs and gaskets i dont want to push it past 40psi.
