302 years...what will work
Thread Starter
|
Junior User
Joined: Dec 2003
Posts: 52
Likes: 0
From: Dallas, TX
302 years...what will work
I need to put a motor in the bronco...
Unfortunately, funds dictate that it be a JY unit, and I would like to know what my options are as far as years are concerned, and what will work with the PCM in the bronc. It is a 90 model. I would like to go to the 5.0 HO roller motor, but basic 302's would be fne.
So, in short, what year 302's will work with the 90 bronc PCM (auto)?
Thanks in advance...
Unfortunately, funds dictate that it be a JY unit, and I would like to know what my options are as far as years are concerned, and what will work with the PCM in the bronc. It is a 90 model. I would like to go to the 5.0 HO roller motor, but basic 302's would be fne.
So, in short, what year 302's will work with the 90 bronc PCM (auto)?
Thanks in advance...
Thread Starter
|
Junior User
Joined: Dec 2003
Posts: 52
Likes: 0
From: Dallas, TX
that's kinda what I was thinking. As long as it is from a computer controlled vehicle, right? How about from 92-96 w/302? Will my PCM work with the inj system and motor out of that year truck? I may have a lead on several of these trucks...
