Ignition switch wiring
Thread Starter
|
New User
Joined: Nov 2004
Posts: 15
Likes: 0
Ignition switch wiring
I am installing an anti-theft "Powerlock" system on my 04 F-250 6.0L.
I need to tap into a wire that is "cold in the key OFF position but HOT in both the ON and Cranking positions".
Any tech person out there that can tell me which wire is the one I need for this?
I prefer to tap into a fused circut.
I need to tap into a wire that is "cold in the key OFF position but HOT in both the ON and Cranking positions".
Any tech person out there that can tell me which wire is the one I need for this?
I prefer to tap into a fused circut.
