quick question
Thread Starter
|
Post Fiend
Joined: Nov 2001
Posts: 5,871
Likes: 0
From: Coutts Canada
quick question
I am putting a 2/4 drop in my truck(described below) and with 10 inch wide tires i am woried about clearence problems in the back (front is ok cause rubber stopper stops the wheel before it hits)with stock height tires hitting the fender flares when i am lets say towing a heavy load or hitting some nasty bumps. Do i have to worry about the rear tires hitting the back fenders? If i do what can i do to prevent this?
82' Flareside: zoom zoom doesn't even begin to describe it
2/4 Drop
Soon to have 325hp 351 Clevo
(maybe more,in a 3600lb truck)
Backed by a C6 with a 2000 rpm stall and a 3.50 9 incher
American Racing AR-23 (series 23) wheels
Upgraded interior
Soon to have a kick @$$ stereo
82' Flareside: zoom zoom doesn't even begin to describe it
2/4 Drop
Soon to have 325hp 351 Clevo
(maybe more,in a 3600lb truck)
Backed by a C6 with a 2000 rpm stall and a 3.50 9 incher
American Racing AR-23 (series 23) wheels
Upgraded interior
Soon to have a kick @$$ stereo
