DD for me please
Thread Starter
|
Junior User
Joined: Aug 2004
Posts: 81
Likes: 0
From: Huntsville, AL
DD for me please
can somebody please help with a DD on my 400. here is the specs.
crank and rods - stock , pistons - .030 stock replacement , intake - weiand action plus , headers , ignition - accel billet dist. and accel super stock coil w/ 8mm taylor wires , heads - stock 2brl w/ cam matched springs, stainless valves, and stock rockers , 800cfm 4brl eldebrock carb. , comp cam 268H
cam specs/ gross lift - .494, dur @ .050 lift - in218 ex218, lobe sep. 110, 1500-5500 rpm
somebody please tell me what i'm running i'm dying to know.
crank and rods - stock , pistons - .030 stock replacement , intake - weiand action plus , headers , ignition - accel billet dist. and accel super stock coil w/ 8mm taylor wires , heads - stock 2brl w/ cam matched springs, stainless valves, and stock rockers , 800cfm 4brl eldebrock carb. , comp cam 268H
cam specs/ gross lift - .494, dur @ .050 lift - in218 ex218, lobe sep. 110, 1500-5500 rpm
somebody please tell me what i'm running i'm dying to know.
Last edited by nate5812; Jan 15, 2005 at 01:05 AM.
Senior User
Joined: Jan 2004
Posts: 299
Likes: 0
From: Illinois
I got around 400 ftlbs of torque at 2000 rpm's and 259 hp at 4000 rpm's. Keep in mind that the DD doesn't figure in the ignition, so you might have a little more.
Sanders
Huntsville huh? I'm from Fayetteville TN, we used to play Hazel Green all the time.
Sanders
Huntsville huh? I'm from Fayetteville TN, we used to play Hazel Green all the time.
Thread Starter
|
Junior User
Joined: Aug 2004
Posts: 81
Likes: 0
From: Huntsville, AL
thanks for the simulation. would there be any improvement with comps 265DEH or 255DEH ?
huntsvile is home but curently iraq with one month left on my year tour. built this engine before coming over here and have been curious for a while but only recently learned what came was put in.
huntsvile is home but curently iraq with one month left on my year tour. built this engine before coming over here and have been curious for a while but only recently learned what came was put in.
