washer motor
Thread Starter
|
Junior User
Joined: Nov 2004
Posts: 83
Likes: 0
washer motor
I Have A 77 F250 4x4 Highboy.when I Got It There Was No Washer Motor,it Has The Nozzles And The Resevoir.and I Know I Can Buy The Motor But How Do I Locate The Wire I Need To Hook It Up To The Switch?and Does It Go On The Drivers Side Right Next To The Resevoir Like It Looks Like It Should? Thanks....
New User
Joined: Jan 2008
Posts: 0
Likes: 24
Yes, 
It is just part of the harness that runs down the inner fender.
It is a rubber friction fit connector.
https://www.ford-trucks.com/user_gal...=55525&width=0
It is just part of the harness that runs down the inner fender.
It is a rubber friction fit connector.
https://www.ford-trucks.com/user_gal...=55525&width=0
Posting Guru
Joined: Sep 2003
Posts: 1,192
Likes: 1
From: lino lakes, mn
I believe its a lime green wire and a black wire with a funky looking plug sort of oval shaped with a tail fin if you buy a pump look for a plug shaped like the end of the pump and yes it goes on the drivers inner fender well a little forward of the brake lines coming out of the mastercylinder
