Intake
Posting Guru
Joined: Jan 2001
Posts: 2,357
Likes: 3
From: S. Mississippi
Intake
hmm, i don't know of a company that makes a intake for a 2bbl carb for the six. I do know of a forum like this one just for the sixes, and the members there have made adapter plates for the 1bbl carb mount to either a 2 or 4bbl carb.
theres always the option of buying an offy or clifford 4bbl intake and going to the parts store and buying a 2bbl adapter for it and slapping a 2bbl on it, but these intakes aren't really cheap.
PM me and i'll let you in on the other forum.
theres always the option of buying an offy or clifford 4bbl intake and going to the parts store and buying a 2bbl adapter for it and slapping a 2bbl on it, but these intakes aren't really cheap.
PM me and i'll let you in on the other forum.
Hotshot
Joined: Oct 2002
Posts: 18,488
Likes: 22
From: The Big, Oregon
Intake
Of all places to look, JCWhitney has Offenhauser 4BBL intakes for the 300-6. Just use one of these, with an adaptor, and a Holley 350 cfm 2BBL, and you can have a setup like mine! I'd recomend switching the exhaust out, too. Try to find manifolds for an efi engine. They use two manifolds, and they actually make better torque than headers.
Jared
Jared
