shifter instalation problems
Thread Starter
|
Freshman User
Joined: Feb 2004
Posts: 33
Likes: 0
shifter instalation problems
Hi, Im getting ready to set up my duff shifter on my bronco, and I need to know if the shift ams go up or down? I have a shifter and the rods, but no arms. By up or down, does the arm face up from the bolt on the tranny, or do they face down? Also, if anyone has a set, I need them. I was gonna try to make a set, but I dont have any detailed measurements of what they need to be, so I was gonna have to wing it. The shifter is an older duff 3 speed, I think actually made by hurst. Thanks
RIch
RIch
Postmaster
Joined: Dec 2002
Posts: 3,594
Likes: 2
From: Southern Oregon USA
They should be pointing up towards the top of the transmission.
You should be able to get replacement arms from Hurst. The Duff shifters are not Hurst, but they are close enough that the Hurst arms will fit.
Jason
You should be able to get replacement arms from Hurst. The Duff shifters are not Hurst, but they are close enough that the Hurst arms will fit.
Jason
