solid dana 44 brake question...
Thread Starter
|
Post Fiend
Joined: Nov 2001
Posts: 7,698
Likes: 4
From: Neenah, Wisconsin
solid dana 44 brake question...
Ok..so when i did my sas last year i couldn't figure out where the anti rattle clips went on the brake pads....ok, honestly i didn't care all that much either...now its time to replace the brake pads and i guess i ought to figure it out. Anyone got a picture, or can someone take a picture of where the anti-rattle clips go for on these solid axles...(79 F-150 axle). Thanks...Ryan
Lead Driver
Joined: May 2000
Posts: 9,236
Likes: 12
From: Senoia, GA
hey ryan.... the anti rattle clips clip on to the ends of the brake pad backing plates and then clip on to the caliper bracket.
here's some pics for reference, scroll to about a quarter of the way down the page...starting with Fig 11
http://fordtrucks.com/lc/lc.php?acti...3d800a939f.jsp
-cutts-
here's some pics for reference, scroll to about a quarter of the way down the page...starting with Fig 11
http://fordtrucks.com/lc/lc.php?acti...3d800a939f.jsp
-cutts-
