Rims not fitting
Thread Starter
|
New User
Joined: Sep 2003
Posts: 6
Likes: 0
Rims not fitting
Hey folks, I have standard cab 99' 3.0 FFV fleet truck. Bought for daily driver. As plain as they come. Want to sport it up a bit for soon to be driving teenager. Found some stock rims off 95 Ranger, deertrack style, 5 lug. However center hole is too small. Can I modify these? The guy at the tire store said no it is a hub or center bearing wheel and could work loose. If so, what tool is best to enlarge hole?
Thanks
Thanks
Last edited by mkenned2; Dec 18, 2004 at 08:47 AM. Reason: typo
Fleet Mechanic
Joined: Dec 2003
Posts: 1,436
Likes: 117
From: Virginia
I would not DIY that. You may find a machine shop to do it, but remember that that center hole is very important. If you mess it up you can't balance the rim right, and it may be unstable on the truck.
