I need a 302
Thread Starter
|
Postmaster
Joined: Aug 2003
Posts: 3,705
Likes: 4
From: Wichita KS
I need a 302
Hey guys I thought I would post this up and see if any of you know of a 302 I could pick up fairly cheap. I'd like to have a 4bbl manifold on it but anything is fine. I've done some checking in the classifieds here and a few other places on line and I'd pay more to ship the thing than I would pay for the motor itself. Thanks and lemme know
Duane
Southeast Kansas Coordinator
Duane
Southeast Kansas Coordinator
Elder User
Joined: Mar 2004
Posts: 620
Likes: 0
Boy i wish i would have known this last week. A buddy of mine sold 2 trucks,one with a 302 and the other with a straight 6 for 700 bucks! I could have gotten the motor for almost nothin. But then again we always late huh Duane!!
Jeff
Jeff
Freshman User
Joined: Aug 2004
Posts: 36
Likes: 0
From: Wichita, Kansas
302
Haven't been checking things out lately, I've got three 302's & will sell one
reasonable if you still need one. N.1 is out of a 78 F-100 N.2 is out of an 83
E-150 Van and N.3 is out of a 90 F-150, however it needs to be rebuilt completely and I don't have the computer or all the EFi.
I'm in Wichita if your close enough to come check them out. And while were on this engine subject, Im looking for a complete set of A/C and Powersteering
mounting brackets & pullies for a 84 F-150. In fact if you have the whole setup I would probably trade the 90 for it as I have no plans for it as of right now.
Thanks
Ron
316-267-1069
rlangdon@access4less.net
reasonable if you still need one. N.1 is out of a 78 F-100 N.2 is out of an 83
E-150 Van and N.3 is out of a 90 F-150, however it needs to be rebuilt completely and I don't have the computer or all the EFi.
I'm in Wichita if your close enough to come check them out. And while were on this engine subject, Im looking for a complete set of A/C and Powersteering
mounting brackets & pullies for a 84 F-150. In fact if you have the whole setup I would probably trade the 90 for it as I have no plans for it as of right now.
Thanks
Ron
316-267-1069
rlangdon@access4less.net
Thread Starter
|
Postmaster
Joined: Aug 2003
Posts: 3,705
Likes: 4
From: Wichita KS
I don't want to rebuild one, I have a 351w in the truck now that I am going to rebuild and I'm just looking for something to shove in the thing while the windsor is getting rebuilt. Do either of the other two run?? I can probly hook you up with all the brackets you need. As soon as I can tackle my wife and take the phone from her and run away I'll give ya a buzz.
Duane
Southeast Kansas Coordinator
Duane
Southeast Kansas Coordinator
