why aint it workign
Thread Starter
|
Freshman User
Joined: Jan 2002
Posts: 31
Likes: 0
From: New Castle U.S.A
why aint it workign
On my 93 ranger with a 5 speed transmision, I had to replace the clutch, doing this was the easy part. Now that it is all back together I am haveing a hard time getting any presure to the slave cylinder so I can bleed it. I have the truck on the lift and and I pump the clutch many of times and its like there is nothing there. I get under the truck and crack the bleeder and nothing but a drible, I have pumped it for like half hour incriments and still nothing. Any suggestions on how i might get her back on the road.
Thanks
Thanks
Instead of bleeding it conventionally, Try a real big syringe. force the fluid from the bottom towards the master
Thread
Thread Starter
Forum
Replies
Last Post
Eallend7
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
6
Jan 13, 2013 07:16 PM
rquinlans
1987 - 1996 F150 & Larger F-Series Trucks
5
Mar 18, 2010 09:10 AM
