boost guage install help!
Thread Starter
|
New User
Joined: Jun 2004
Posts: 21
Likes: 0
boost guage install help!
Hey guys trying to install a boost gugge in a 2003 psd 7.3, All i see coming off the turbo is a red hard plastic looking line? where exaly to i need to 'T' into for boost on this truck, Thanks for all your help.. Does any one have any pics of there install?
Chad,
USAF
Chad,
USAF
Postmaster
Joined: Jan 2004
Posts: 4,758
Likes: 7
From: colorado
the easiest way is to tap into the map sensor line. put your hand on the oil filler cap,move it straight towards the passenger fender, you will hit the map sensor(it has a wireing harness clipped to the front of it with three wires on it and has a 3/8" hose comming out the back)tap into the hose comming off the back of the sensor
Thread Starter
|
New User
Joined: Jun 2004
Posts: 21
Likes: 0
but
The guage i bought is mechanical, all it came with was some tubing and a T fitting, So all i have to do is cut the line in the MAP sensor and apply my t fitting and run the clear tubing to the back of the guage?
Thread
Thread Starter
Forum
Replies
Last Post
