Body lift help
Thread Starter
|
Freshman User
Joined: Nov 2004
Posts: 34
Likes: 0
Body lift help
i was just wondering if it really is that difficult to put a 3 inch body lift in a 98 ranger 4wd im going to school right now to become a mechanic so i am familiar with some things and also if there are any tips or trick to installing it
thanks
steve
thanks
steve
Last edited by smoky1978; Nov 20, 2004 at 04:40 AM.
Elder User
Joined: Mar 2004
Posts: 515
Likes: 1
From: Hillsboro, OR
Just lots of time involved. Difficulty can be old rusty bolts. Having never done one myself, I couldn't tell you how hard it is. But I do have a 98 4x4 also that a want to put a body lift on, so let me know how it goes 
The guys over at www.offroadrangers.com could probably help you a little better with this question... Good luck
The guys over at www.offroadrangers.com could probably help you a little better with this question... Good luck
New User
Joined: Nov 2004
Posts: 3
Likes: 0
It's more of a pain in the butt than it is hard. It's good to have an extra set of hands to lift a few things. It took me about a day to do it myself with my dad lending a hand for a couple minutes. Make sure you crank the torsion bars if you wanna get it leveled out. Any other questions email me.
