Custom install or 1990 Bronco
Thread Starter
|
Senior User
Joined: Sep 2004
Posts: 475
Likes: 0
Custom install or 1990 Bronco
Hey, I saw these pictures of a custom install on a bronco. It looks like a good idea just wanted to run it by you guys.
Heres the link... Look under Woofers near the top...
http://www.superford.org/registry/ve...=17313#content
Looks simple enough. My question is, since that technically isnt a box, would those subs have to be free air subs? If so, any one wanna recommend any good 10" free air subs? This looks like an ideal space saving design which is what I was looking for. Let me hear your guys opinions. Thanks.
Kyle
Heres the link... Look under Woofers near the top...
http://www.superford.org/registry/ve...=17313#content
Looks simple enough. My question is, since that technically isnt a box, would those subs have to be free air subs? If so, any one wanna recommend any good 10" free air subs? This looks like an ideal space saving design which is what I was looking for. Let me hear your guys opinions. Thanks.
Kyle
Thread Starter
|
Senior User
Joined: Sep 2004
Posts: 475
Likes: 0
http://www.radiomancaraudio.com/deta...ioneer-tsw254f
Heres a link to a decent looking one... LMK what you guys think.
Kyle
Heres a link to a decent looking one... LMK what you guys think.
Kyle
Freshman User
Joined: Sep 2004
Posts: 48
Likes: 0
I personally don't like free-air subs... But they would work in that application. I think it would sound much better if you were are to seal the door and the enclosure. I would do it with fiberglass. But then you are getting into a much bigger project...
