door seals
Thread Starter
|
Freshman User
Joined: Jan 2004
Posts: 45
Likes: 0
From: oregon
door seals
i have a 73 ford crew cab 4x4 and i am looking for door seal for all the doors (4). i also need new felt that goes around all the windows. where should i go to get good quality parts.
thanks,
Ryan
thanks,
Ryan
Thread Starter
|
Freshman User
Joined: Jan 2004
Posts: 45
Likes: 0
From: oregon
i bought the door seels from a1 auto, the problem is now when i shut the door i have to SLAM it. i have to shut it at least twice VERY HARD. i'm afraid the mirrors are going to fly off i have to shut it so hard. are the seels messed up or need to be broken in. can i cut them?? anything's got to be better than the way it is now.
Thread Starter
|
Freshman User
Joined: Jan 2004
Posts: 45
Likes: 0
From: oregon
I was thinking about putting a heat gun on them and then shutting the door, but maybe i'll just tuff it out till summer and see what happens. thanks for the reply.
i see your from the willamette valley. I live in mcminnville.
i see your from the willamette valley. I live in mcminnville.
Senior User
Joined: Dec 2002
Posts: 214
Likes: 0
From: outsidechicago
i have the same problem with my 58',they have to wear in a bit to fit right.you might have to adjust the lock striker a few time's to get them to close rite.don't heat them,you might melt or distort them.hope this help's/scott.
