Reading Dash Codes
Thread Starter
|
Mountain Pass
Joined: Jul 2004
Posts: 157
Likes: 1
Reading Dash Codes
Searched the forums and could not find anything on this subject, so here goes.
I found on another forum the Dash Board code reading check.
Engine Off, press and hold down the mileage reset button and start engine. Dash goes into a code reading mode.
Anyways I was clicking through the codes and frankly there was so many different codes I am clueless as to what I am reading. So anyone have an itemizied list of what I am reading or a link to them.
(2003 F350 7.3 PS)
Also anyone have the link to the speedo reset when larger tires are installed?
I found on another forum the Dash Board code reading check.
Engine Off, press and hold down the mileage reset button and start engine. Dash goes into a code reading mode.
Anyways I was clicking through the codes and frankly there was so many different codes I am clueless as to what I am reading. So anyone have an itemizied list of what I am reading or a link to them.
(2003 F350 7.3 PS)
Also anyone have the link to the speedo reset when larger tires are installed?
