Sounds like a 70.
Dana 70
Thread Starter
|
Logistics Pro
Joined: Jan 2002
Posts: 3,739
Likes: 3
From: GANS
Originally Posted by highboy1975
bremen--we should get together and do some wheeling next summer, all the clubs around me are for little jeep wannabes. my f250 thats gonna be runnin hopefully 40s isn't gonna look right with the jeepers. get a western pa ford offroad club goin or somthn. not enough love in this area for the big iron
I was going to go on a ride with them, but my f150 with 29" tires would have probably sucked...
Thread Starter
|
Logistics Pro
Joined: Jan 2002
Posts: 3,739
Likes: 3
From: GANS
Just wanted to get back on topic....
I measured my axle tube yesterday, it is 3.5". I assume Dana 70??
It had a "2" stamped on some of the webbing on the passenger side....
and the bottom looks ugly and lumpy like ivan's 70
.
I measured my axle tube yesterday, it is 3.5". I assume Dana 70??
It had a "2" stamped on some of the webbing on the passenger side....
and the bottom looks ugly and lumpy like ivan's 70
.
Thread Starter
|
Logistics Pro
Joined: Jan 2002
Posts: 3,739
Likes: 3
From: GANS
Originally Posted by wyldstallyn73
Last I knew, there were only 5 options for the dana 70- open, Powr-Lock(limited slip, but a damn good one!)Detroit Locker, ARB, and the elusive and possibly ficticious spool.
http://www.reiderracing.com/lockrightapp.htm
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
10 Most Surprising 2026 Ford Truck Features!
Joe Kucinski
Thread Starter
|
Logistics Pro
Joined: Jan 2002
Posts: 3,739
Likes: 3
From: GANS
Originally Posted by proeliator
I really do think that in the next year we are going to have another selectable to chose from for the D70...
to get an ARB, new bearings, gears, and compress, you are talking about $1200 or more, and that isn't even counting labor..
If i had press and bearing pullers, I probably wouldn't care. However, labor would probably be another $300-400 since it is a Dana [a big one at that!].. I had a ford 9" done for $150.. but it is actually simple enough I could have done it..
Post Fiend
Joined: Sep 2000
Posts: 8,238
Likes: 3
From: Oregon
Bwahahaha 
It even looks like I have a blonde mullet ala Joe Dirt. Priceless. A special thanks to Ivan for opening this can of worms, and to Bremen for giving the inspiration for my next hauler. Sigh...now I have to hunt you all down and crush your skulls in with my bare hands
It even looks like I have a blonde mullet ala Joe Dirt. Priceless. A special thanks to Ivan for opening this can of worms, and to Bremen for giving the inspiration for my next hauler. Sigh...now I have to hunt you all down and crush your skulls in with my bare hands
Thread Starter
|
Logistics Pro
Joined: Jan 2002
Posts: 3,739
Likes: 3
From: GANS
Originally Posted by proeliator
Bwahahaha
It even looks like I have a blonde mullet ala Joe Dirt. Priceless. A special thanks to Ivan for opening this can of worms, and to Bremen for giving the inspiration for my next hauler. Sigh...now I have to hunt you all down and crush your skulls in with my bare hands
It even looks like I have a blonde mullet ala Joe Dirt. Priceless. A special thanks to Ivan for opening this can of worms, and to Bremen for giving the inspiration for my next hauler. Sigh...now I have to hunt you all down and crush your skulls in with my bare hands
sorry about the mullet, friends don't let friends do drunken photoshoping