EGR valve location
Thread Starter
|
New User
Joined: Oct 2002
Posts: 1
Likes: 0
From: C-town USA
EGR valve location
I have a '94 Ranger 4.0L v6 auto. trans. and i have been told i needed to replace the Egr valve. I have a Haynes manual and it shows the valve but when i looked on the truck it's no where to be found. Any ideas on location?
Posting Guru
Joined: Apr 2000
Posts: 1,746
Likes: 4
From: PNW
EGR valve location
I have a '91 Ranger (with CA emissions equipment) and '95 Aerostar, both with the 4.0 and neither has an EGR valve. You may not have one. But, look for a tube coming from the exhaust manifold that goes towards the intake manifold. The tube from the exhaust should lead to the EGR valve, and from there, the exhaust gas goes into the intake. I think (but am not 100% sure on this) that the 4.0 didn't get an EGR until OBD II came along in '95.
Thread
Thread Starter
Forum
Replies
Last Post
