390 tranny radiator
Thread Starter
|
Senior User
Joined: Nov 2003
Posts: 221
Likes: 0
From: eugene
390 tranny radiator
is this the right hookup for lines from tranny to radiator and intercooler for my automatic c6 and the vaccuum line to the engine? https://www.ford-trucks.com/user_gal...=57092&width=2
Thread Starter
|
Senior User
Joined: Nov 2003
Posts: 221
Likes: 0
From: eugene
oh my god thanks a lot ive been trying to figure this crap out for ever.... anyway the radiator and the intercooler are already it truck installed.. i talked to the guy at the tranny shop and said it doesnt matter what hose goes through what.... anyways thanks again
Postmaster
Joined: Nov 2002
Posts: 3,447
Likes: 1
From: Littleton, CO
I'm no expert but it seems to me the external cooler should be mounted or in line after the radiator. This would give your fluid one last cool blast before heading to the trans. If you cool the fliud before the radiator, you could actually be bringing the temp up before sending it to the trans.
Just a few $.01's --Mike
Just a few $.01's --Mike
