Request: Bronco 2 Parts Information
Thread Starter
|
New User
Joined: Nov 2000
Posts: 1
Likes: 0
Request: Bronco 2 Parts Information
Hello, Please point me in the right direction for information on parts and Ex. for a 1989 Ford Bronco 2 2.9L. This is what I would like to do.
1. Rebuild 2.9L or get a new one
OR
2. Install of a 5.0L (302) If it can be done.
3. Lift Kit
And other parts. I have looked every where that I know, cant find anything. even my local ford dealer does not have parts, and what parts they have cost to much. like 89.00 for (1) replacment speaker.
Please reply to: zr13@onebox.com
As Im looking, I might forget this page.
Thanks
1. Rebuild 2.9L or get a new one
OR
2. Install of a 5.0L (302) If it can be done.
3. Lift Kit
And other parts. I have looked every where that I know, cant find anything. even my local ford dealer does not have parts, and what parts they have cost to much. like 89.00 for (1) replacment speaker.
Please reply to: zr13@onebox.com
As Im looking, I might forget this page.
Thanks
Elder User
Joined: Aug 2000
Posts: 763
Likes: 0
From: home
Request: Bronco 2 Parts Information
I rebuilt my 89 Bronco II a couple of years ago. I pulled the engine and left the heads on & crank in. I had a machine shop go thru it and put on World Casting heads. These heads weigh 5 lbs more, but do not crack like the Ford ones. I put the engine back in after installing the oil pump, pan, intake, exhaust manifold etc. The cost for the engine rebuild and parts by the shop was $1700.00 This included new pistons, rings , gaskets, cam,bearings, oil pump, lifters etc.A little pricey but those new heads cost me about $500.00 Runs great. Hope this will help.
89 Bronco II
93 Aerostar
92 F150 ext XlT
89 Bronco II
93 Aerostar
92 F150 ext XlT
Thread
Thread Starter
Forum
Replies
Last Post
BrotherMabe
1967 - 1972 F-100 & Larger F-Series Trucks
67
Feb 25, 2014 12:18 PM
