BII No Start
Thread Starter
|
Senior User
Joined: Jun 2000
Posts: 216
Likes: 0
From: CANADA
BII No Start
I have a 1986 Bronco II that is getting spark and fuel, but it will not fire. I tried changing the TPS sensor, checked the fuel pressure and the spark, but there is no fire. The engine doesn't even attempt to fire. Any help will be much appreciated.
Hoppy.
Hoppy.
Junior User
Joined: Dec 2000
Posts: 90
Likes: 0
From: Middle Tennessee
BII No Start
The computer has to activate the injectors. It may not be coming on. Ford computers are pretty robust, so I'd look for other causes, like the computer power relay, ground wire connections near the battery (there is a small wire coming off the negative battery terminal that feeds the ground to the computer-it has a connector in it about 1 foot from the battery that can corrode) or maybe just a fuse. Can you get the codes checked? That would be the best place to start.
