Push Bumper
Thread Starter
|
Junior User
Joined: Mar 2004
Posts: 54
Likes: 0
From: Farmington, Iowa
Push Bumper
[FONT=Arial Black][SIZE=4][COLOR=DarkRed][B] I am a track packer at a local racetrack. That means I go out on the track before the races and use my truck to pack the track in for the racecars. I was wondering how I could make a bumper that I could put on to push the cars around on the racetrack but also take it off in the off season.
Senior User
Joined: May 2004
Posts: 125
Likes: 0
one idea would be to install a 2" front receiver on your truck. build the push bumper to slide into this and viola! you have a combination push bumper/winch mount.
when I put mine together I used 2 receivers because of the big heavy things (like 2 ton trucks) i get to push around the yard with the yard dawg ('72 f250 hiboy 4x4 w/wrecker boom)
Hope this gives you an idea or two!!
when I put mine together I used 2 receivers because of the big heavy things (like 2 ton trucks) i get to push around the yard with the yard dawg ('72 f250 hiboy 4x4 w/wrecker boom)
Hope this gives you an idea or two!!
