intake
Thread Starter
|
Junior User
Joined: Mar 2003
Posts: 95
Likes: 0
From: Central California
intake
I have a 73 f250 with a 360.
I want to install a 4bbl manifold in place of the old 2bbl.
There is one locally I can get dirt cheap, but its from a 69 390.
Will this swap staight off?
P.S. I know that an aftermarket peice would be a better choice, but I can get the stock one for about 15$ And I already have a carb, making the swap virtually free. (except for the standard blood and sweat to actually make the swap). If I had the $ laying around....I would..... but I don't.
I want to install a 4bbl manifold in place of the old 2bbl.
There is one locally I can get dirt cheap, but its from a 69 390.
Will this swap staight off?
P.S. I know that an aftermarket peice would be a better choice, but I can get the stock one for about 15$ And I already have a carb, making the swap virtually free. (except for the standard blood and sweat to actually make the swap). If I had the $ laying around....I would..... but I don't.
Thread Starter
|
Junior User
Joined: Mar 2003
Posts: 95
Likes: 0
From: Central California
I'l probably go grab it today then! I'll be sure to post those #'s for ya. I do know its not one of the really desireable ones ("s" code or police) but it still has to be better than the 2 holer. Its nice living on a ranch, and filling the tank out of the buisnesse's gas. Opens up a world of possibilities when you don't have to worry so much about 2.35 a gallon. 
Thread
Thread Starter
Forum
Replies
Last Post
dawolverine
1948 - 1956 F1, F100 & Larger F-Series Trucks
7
Aug 9, 2009 10:30 AM
icuhatn99
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
1
Feb 5, 2006 10:35 PM
