cleveland valves
Thread Starter
|
Senior User
Joined: Jan 2004
Posts: 131
Likes: 0
From: Midwest
cleveland valves
I am getting ready to rebuild another 351M. I was wondering if anyone had put the bigger valves in it, the 2.19 Intake. Is it worth the money, will I see a big improvement over stock. If anyone has done this please let me know.
Elder User
Joined: Jun 2003
Posts: 886
Likes: 1
From: Houston/Hope BC
http://www.jason.fletcher.net/tech/f.../cleveland.htm
http://realbig.com/detomaso/1998-02/161.html
I think I spent about $800.00 on my heads. The mid and big end are noticably improved on my 400. Was it worth it? Sitting here at the desk looking at my bank balance, no, driving the truck and smiling... yes.
BTW, I learned here from Danlee the big valves should be cut down (shrouding). Search here or find the Aussie CH3V (?) performance heads and copy their valve sizes.
http://realbig.com/detomaso/1998-02/161.html
I think I spent about $800.00 on my heads. The mid and big end are noticably improved on my 400. Was it worth it? Sitting here at the desk looking at my bank balance, no, driving the truck and smiling... yes.
BTW, I learned here from Danlee the big valves should be cut down (shrouding). Search here or find the Aussie CH3V (?) performance heads and copy their valve sizes.
Last edited by Ecuri; Oct 6, 2004 at 07:39 PM.
