dual transfer case

Reply Subscribe

Thread Tools

Search this Thread

Sep 30, 2004 | 12:21 AM

Pulling300F250

Thread Starter

New User

Joined: Oct 2002

Posts: 8

Likes: 0

From: Ste Genevieve usa

dual transfer case

Has anyone attempted a dual transfer case yet on any of their trucks? Im interested in the 1980=86 or earlier.
Prefered engine 300 BIG SIX
later
Chris

Oct 1, 2004 | 08:25 PM

wizzard351

Postmaster

Joined: Sep 2004

Posts: 3,166

Likes: 2

From: wi

we did that on a 78 250 at the shop for one of the guys we wheel with it works good but he was runnin 3:55's and if he puter down in dubble low it would scatter the u joints after he put in 5:13's that all stoped. it workout rather uniqe to cuzz we used a 205divorce case from a 74 dodge and frontend from the same so the drivline was on the wrong side made it easy to run the front shaft nothin in the way (like the front case)pluse it put the long axle on the driverside so with a welded front he left the short side lock(lesschance to break)then when he needed it just locked'em both