Still have a bunch of stuff to get rid of:

428CJ iron exhaust manifolds with spacer - $500
C4 Bellhousing/Converter(24K miles)/New flywheel for '77 302 Mustang - offer
'77 460 heads/bare - $75obo
Breather Tube that bolts to back of 427 Ford Aluminum Intake- $50 obo.
1969 Mustang 9" center section/3.00:1 open carrier with tag - $75
1970 Mustang RH/LH Fenders/ Some putty for minor dings/rust minimal -$200
69/70 Mustang front buckets/ Standard interior / minor foam damage on drivers/ need recovered - $150obo
Tranny Cooler from '89 F250/ no leaks - $50obo
'77 302 heads - rusty but rebuildable - $25
'78 351M/400 bare heads - greasy but rebuildable -$25


Stryder

 

Sent you an e-mail....

 

I have a non Ford request... a friend of mine needs a 2.5 Tech 4 from any GM front drive with that motor prior to 86 build, yes 86 is ok too... if the whole car is cheap enough, he will buy it that way. This is to go into an 84 Fiero... Celebrity, Citation, Somerset, Skylark, Calais, Grand Am, Ciera, 6000, J2000 all have this engine as an option. the @.0 from the same year cars are also an option if the price is right. Needs to be a running motor.

 

1979 f150 4x4. 400M, c6, heavy duty overload springs, posi rear, 33's on turbine wheels. Truck needs exhaust and tailights wired up. Bed, driver fender, bumper seen better days. Runs great, bought 9 months ago and have never driven. Located in the CR IC area. Looking to get $900.

Other possible for sales.
2x 460's. Both complete. One from a 79 f350.
33x14.50x15 mickey thompson baja belted hp's

Possible trades considered for 67-72 f100 parts.

Moses

 

Please folks NO discussion on this thread *Just Listings*.
Any & all discussion should be done privately .

Thanks