bedliner
Thread Starter
|
Junior User
Joined: Jul 2004
Posts: 67
Likes: 1
bedliner
I have a 04 crew with the 51/2 bed and put a pendaliner in it. in the front they just drilled two holes were the hooks are in the 61/2 bed they have nice caps that go over the holes and the hooks screw into that nice look they say all bedliners are that way with the 51/2 bed anybody have a duraliner if so how is yours
Junior User
Joined: Apr 2004
Posts: 68
Likes: 0
I have a 5 1/2' pendaliner and am a little unsure if it is installed correctly. There are two 3" openings in the front to allow access to the tie hooks. I had to call pendaliner to have them send me the two covers, but the covers won't fit because the hooks stick out the holes too far. Has anybody else found this to happen? If so, what have you done to resolve it? Thanks!
Senior User
Joined: Jun 2004
Posts: 147
Likes: 0
I believe the Duraliners have the holes pre-drilled. The bolts are removed from the tiedown hooks and hooks and bolts are reinstalled on the outside of the bedliner. I think this is much better than bedliners that have big holes cut out for the tiedowns that are open all around the tiedowns and thus allow more water in (and with the Duraliner you can easily seal around the bolt holes with silicone). 
Last edited by mwh; Sep 13, 2004 at 04:30 PM.
