View Poll Results: Is anyone interested in it?
Yes
12
92.31%
No
1
7.69%
Voters: 13. You may not vote on this poll
Anyone Interested?
Thread Starter
|
Former Vendor
Joined: Mar 2004
Posts: 4,362
Likes: 3
From: Hendersonville, NC
Anyone Interested?
Just curious to as if anyone would be interested in a database/log/archive of the destruction of my latest engine and the step-by-step of the takedown and rebuild/buildup process...
I realize that such a thing would not be very useful to many people, but I figure that it might be of value to a few of you. I am halfway through the takedown process and my little analysis of failure, and have lots of pictures (a total of not quite 300, you can see some in my gallery) and will take many many more. I have jotted down notes on a few various things and could do a full writeup on the entire process step-by-step with not a tremendous amount of effort.
Not many parts and resources are available yet for these engines, and I'm having to make progress on the fly as I learn...I would hope that I can share my efforts to help provide assitance to any one of you who goes through the same thing in the future. Not many of you will, however there will be a few.
I would just like a consensus on who would be interested in it, if I could get it published on here (IF). It would be a writeup and photo archive of all the parts and steps of my progress, and a list of shops and parts suppliers, until I get the motor back to full operational conditions, and another writeup on the twin turbo setup. Keep in mind that it will take QUITE a long time for me to complete this...
I realize that such a thing would not be very useful to many people, but I figure that it might be of value to a few of you. I am halfway through the takedown process and my little analysis of failure, and have lots of pictures (a total of not quite 300, you can see some in my gallery) and will take many many more. I have jotted down notes on a few various things and could do a full writeup on the entire process step-by-step with not a tremendous amount of effort.
Not many parts and resources are available yet for these engines, and I'm having to make progress on the fly as I learn...I would hope that I can share my efforts to help provide assitance to any one of you who goes through the same thing in the future. Not many of you will, however there will be a few.
I would just like a consensus on who would be interested in it, if I could get it published on here (IF). It would be a writeup and photo archive of all the parts and steps of my progress, and a list of shops and parts suppliers, until I get the motor back to full operational conditions, and another writeup on the twin turbo setup. Keep in mind that it will take QUITE a long time for me to complete this...
Thread
Thread Starter
Forum
Replies
Last Post
whiteboyslo
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
60
Oct 3, 2012 05:54 PM
sfc2001
1997 - 2006 Expedition & Navigator
38
Sep 2, 2008 04:28 PM
