Jacking Points on 95 Explorer
Thread Starter
|
Senior User
Joined: Feb 2001
Posts: 159
Likes: 0
Jacking Points on 95 Explorer
Anyone know for the 95 Explorer, a good place to put jack stand on the front end?
There are two lifting points on each lower control arm designed for the floor jack that comes with the car, but these don't work well with a floor jack or jack stands. Thanks,
Barry
There are two lifting points on each lower control arm designed for the floor jack that comes with the car, but these don't work well with a floor jack or jack stands. Thanks,
Barry
New User
Joined: Feb 2001
Posts: 22
Likes: 0
Jacking Points on 95 Explorer
I always use the lower control arm like you mentioned and have had no problems so I am not sure why you said it does not work well. I use my floor jack on the back part to lift the frontend and then put the jack stand on the other side in the front. I have done this many times to change brakes, etc..
Thread
Thread Starter
Forum
Replies
Last Post
ilbigmike
Explorer, Sport Trac, Mountaineer & Aviator
7
Nov 7, 2011 05:52 PM
