help with hubs.
Thread Starter
|
New User
Joined: Jul 2004
Posts: 20
Likes: 0
help with hubs.
hey guys im putting my new warn hub on my f-350. i have taking the break cats off. do i need to take the whole disk off ? are the 4 bolts on the back of the disk holding the rest on? if this question doesnt make sence let me know.
Senior User
Joined: Sep 2003
Posts: 201
Likes: 0
From: Tally-ho
remove caliper by 2 larg bolts and set aside
take off disc
remove hub clip and pull hub off
to take assy off, remove o-ring and washers along shaft and remove the 4 bolts on innerside of assy to remove hub
hope this helps
Siyé
take off disc
remove hub clip and pull hub off
to take assy off, remove o-ring and washers along shaft and remove the 4 bolts on innerside of assy to remove hub
hope this helps
Siyé
New User
Joined: Apr 2004
Posts: 12
Likes: 0
I also just installed Warn lockout's on my 2000 F-350 . Did your set come with snap rings? I guess they are sent to replace the original Ford rings on the axle shaft behind the lockout. I just left the originals in. I hope I am not missing something.
