Need Header Help
Thread Starter
|
Freshman User
Joined: Feb 2004
Posts: 46
Likes: 0
From: wyalusing, pa
Need Header Help
Hi guys, i was wonderin' if you could tell me what headers I need for my truck. I have a 65 f250 4x4 with a 352. I have seen headers listed for 65 2 wheel drive or 66 4 wheel drive, but not 65 4 wheel drive. I know the 65 4x4 was kind of an oddball, so i am hoping you can help, thanks.
Junior User
Joined: Aug 2002
Posts: 93
Likes: 0
From: S.E.Mo
I don't know if your '65 has the rear eng/bellhousing mount/crossmember like my '63 has, but I ordered some Sandersons for it. Thats been 3 weeks now, I keep hearing " will be there Fri for sure ". If and when they get here, for those with pre '65 trucks with an FE engine, I'll be able to offer some input as far as fit. If you want to check them out, go to Sanderson's site and look up FF427, or FF390, that will give you an idea. There ph# is 1 800 669 2430, there on pacific time. Al
Thread Starter
|
Freshman User
Joined: Feb 2004
Posts: 46
Likes: 0
From: wyalusing, pa
thanks for the help
Thanks for the nudge in the right direction. The hedmans are by far the cheapest so I will most likely get a set of those. I see they list 65-76 as the years that their headers fit. I will be giving them a call in the morning to make sure they fit my truck and then probably order them. Thanks again, Jim.
