When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
My Borfinator went out, the dealer wants 400. to replace it. I can buy a new one for $125. but unsure how it goes in , right side up or upside down. Its on jack stands now so any help is appreciated
Haynes manual makes referance to it saayin justthat the flange side goes up and match the two indicator marks. I am going out to try it if that doesn't work or look right I will have to do some research in my FordBronco books. Wish me luck.
I appreciate all the help, once I got the spline lined up it dropped right in . The pressure is back even higher than it was before and it seems like the low end throttle response has increased. Strange that such an insignifacant parts makes such an impact.
Hey dhelper, try to align the radioactive pins made from depleted uranium shells next time with special tool ZXT44-26 next time. If you need to borrow mine sorry I lent it out to NASA at Jonhnson space center in Houston. You can ask for Chuck there, he will help you.