My auto hubs on my 95 F150 ½ ton are making a lot of loud banging sounds so I got a set of milemarker manual hubs to replace them. My question is do I need to replace the wheel bering lock nuts(spindel nuts) or will the #302 hubs fit without them?

 

There are Many posts about this same subject on the boards. Do a search and you will get plenty of info.

If your automatic hubs have only three bolts on the cover, you will need a conversion kit.

If your auto hubs have five bolts on the cover, it will be a direct replacement with the manuals.

 

i just did this same thing friday....dealers and salesman told me i needed the kit and when i took it apart it was very easy to see i didnt need the kit. i had 5 screw auto hubs. i used superwinch manuals. they are the same price as milemarker but the entire hub is metal. hope this helps...