nerf bar mounting
Senior User
Joined: Feb 2003
Posts: 178
Likes: 0
This may or may not help. It will hook up at three points, most likely. There should be a coupling nut, this screwing into the bottom of a seatbelt bolt, then a support is bolted to it. The other hook up is on the frame, basically a piece that fits around the flange on the frame rail, and in secured by a set screw, I think this support pivots out and connects to the end of the bar. Then there is a supports on the curve of the bar near the door, I forget how it bolts up, but I think it's another coupling nut type thing. Hope this helps
Senior User
Joined: Feb 2003
Posts: 178
Likes: 0
No I don't, sorry. I have a 96 also. If you have any specific questions maybe I can help you. Mine are currently kinda banged up, if you do serious offroad stuff they WILL get hit. They look good though, and are useful.
Senior User
Joined: Jan 2003
Posts: 192
Likes: 0
From: Cary
I bought mine used and they were missing some of the hardware. I think the original mounting set-up looks a little weak anyway so I'm going to a friend's house tonight to have them welded on.
I'll have some photos after this weekend.
I'll have some photos after this weekend.
