1989 Ranger Clutch Bleeding Problem

Reply Subscribe

Thread Tools

Search this Thread

May 11, 2004 | 08:29 PM

stano

Thread Starter

New User

Joined: May 2004

Posts: 4

Likes: 0

1989 Ranger Clutch Bleeding Problem

Hello! I had to put a New clutch in my 89 Ranger.I Guess after14 years it needs a New one. I put in a new clutch,Pressure Plate,Throwout Bearing.I Bled the Clutch Master cylinder and Hose the Peddle is Real Hard when I push the Valve ay the end of the Hose the Peddle Moves and Brake Fluid comes Out. The Problem I am having when I hook it up to the Coupling no fluid is going in the throwout Bearing cylinder and the Peddle is Hard.when I take it off the Coupling and push the Valve the Peddle moves freely and Brake fluid is come out,When I try it through the Coupling its Hard again and no Fluid I even took the Bleeder all the way Out.Any Help would be Helpful!

Thanks
Stan