trany swap
Thread Starter
|
Freshman User
Joined: Feb 2004
Posts: 36
Likes: 0
Aod swap
Has anyone done the swap from C-6 to AOD in 79 F150 4x4 with 460 and np205. what if anything can you tell me about this swap. ie. will 205 bolt to trany, where can you find bellhousing or is it one piece like C6. thanks in advance for any help.
Posting Guru
Joined: May 2003
Posts: 1,242
Likes: 3
From: Joliet, Illinois
The AOD will cost a lot to make it as strong and reliable as a C6 with the torque and hp a 460 will put out. You might just want to get a Gear Vendor unit and have a super strong 6 speed C6.
New User
Joined: May 2004
Posts: 16
Likes: 0
From: Emmaus (Allentown), PA
There is an excellent and very complete discussion of this swap written by Danny Cabral in the archives. I found it by entering "C-6 to AOD 429". His was on a Bronco - but same difference. (Not cheap - but sounds great.)
Thread
Thread Starter
Forum
Replies
Last Post
