96 E350 PSD Air Filter
Posting Guru
Joined: Dec 2003
Posts: 1,570
Likes: 0
From: South Texas Coast
Most of the folks here, including me, use the TYMAR filter. If you want info about where to get it just e-mail me. If I post it here it might get censored
Last edited by Phydeaux88; May 3, 2004 at 12:51 AM.
Freshman User
Joined: Mar 2004
Posts: 33
Likes: 0
Rip out that factory air box, unplug the sensor first and just lay it on the fender and get you the Tymar intake $142.00 shipped to my house with an extra filter. Or build one yourself. I also ran a 4 inch line from the grille to beside the filter to provide cooler outside air to it, just don't point it right at the filter.
Lowered my egts about 100 degrees pulling heavy load.
Lowered my egts about 100 degrees pulling heavy load.
Thread Starter
|
New User
Joined: Mar 2004
Posts: 8
Likes: 0
Hi PSDJOE and JOHNDIESEL. I phoned Dale at Tymar, and he does not have a filter for the E350 van with a 7.3 PSD. With the E350 there is almost no room under the hood. I cannot reach in to touch the glow plug relay, or anything else. You guys are lucky with your big engine compartments. So I am still open to suggestions. Thanks
Post Fiend
Joined: Aug 2002
Posts: 5,324
Likes: 1
From: Denton,TX
Is it possible for you to post a picture of the airbox and filter? I have no idea where it is or what it looks like on the E series van. I'm not sure in your case if the filter that the Tymar uses will fit. Here's a pic of it:
http://community.webshots.com/photo/...36219971hAOAqJ
http://community.webshots.com/photo/...36219971hAOAqJ
Thread
Thread Starter
Forum
Replies
Last Post
