L.E.D. marker lights on side.
Thread Starter
|
Junior User
Joined: Sep 2003
Posts: 77
Likes: 0
From: Boiling Springs,S.C.
L.E.D. marker lights on side.
I was planing on putting some marker lights (L.E.D.s) on side at running
boards. I was planing on tieing in at the tail lights or parking lights. I'm
looking for the best way. Thanks for any help.
Greendiesel
boards. I was planing on tieing in at the tail lights or parking lights. I'm
looking for the best way. Thanks for any help.
Greendiesel
Thread Starter
|
Junior User
Joined: Sep 2003
Posts: 77
Likes: 0
From: Boiling Springs,S.C.
The lights are 15 7/8" long. I'll be placing two per side on the molded steps
just below the doors. Here is a link to the lights.
http://www.shopdiesel.com/index.cfm/...uct_id/913.htm
L.E.D. lights don't drawl as many amps as regular bulbs, so could I run them(63.5" of lighting) as one connection with T connectors? I want to tie into either the parking lights or tail lights. I haven't received the package as of this post so I'm hoping to eliminate any potential problems(dim lighting,blown fusses).
just below the doors. Here is a link to the lights.
http://www.shopdiesel.com/index.cfm/...uct_id/913.htm
L.E.D. lights don't drawl as many amps as regular bulbs, so could I run them(63.5" of lighting) as one connection with T connectors? I want to tie into either the parking lights or tail lights. I haven't received the package as of this post so I'm hoping to eliminate any potential problems(dim lighting,blown fusses).
Last edited by greendiesel; Apr 10, 2004 at 12:18 AM.
