Intermittent electrical problem
Thread Starter
|
Senior User
Joined: Nov 2003
Posts: 295
Likes: 2
From: Vancouver
Intermittent electrical problem
Hi,
I have an intermittent electrical problem on my 82 f150. Occasionally when I start-up I don't have turn signals or blower motor. Sometimes my fuel and temp gauge read zero, and also I blew a fuse for the horn/cigarette lighter (I heard the fuse pop right after I started up). Although the indicators and blower motor are on separate circuits I noticed in the wiring diagram that the hot side of both fuses are common. Does this type of problem sound familiar to anyone, I'm thinking ignition switch, but I can't replicate the problem when I'm trouble shooting
.
Thanks
I have an intermittent electrical problem on my 82 f150. Occasionally when I start-up I don't have turn signals or blower motor. Sometimes my fuel and temp gauge read zero, and also I blew a fuse for the horn/cigarette lighter (I heard the fuse pop right after I started up). Although the indicators and blower motor are on separate circuits I noticed in the wiring diagram that the hot side of both fuses are common. Does this type of problem sound familiar to anyone, I'm thinking ignition switch, but I can't replicate the problem when I'm trouble shooting
.Thanks
Freshman User
Joined: Mar 2004
Posts: 29
Likes: 0
Thanks For The Response! The Ign. Switch Is Going To Be My Next Thing To Try. If That Doesn't Get It For Me, Then I'm Going To Get Into The Primary Wiring & Vacuum Hoses, Per Responses To My Thread "83 Crankshaft Sensor"
Thread Starter
|
Senior User
Joined: Nov 2003
Posts: 295
Likes: 2
From: Vancouver
The "switch" and the "lock" are at opposite end of the steering column connected by a metal rod. where is the wear happening, in the lock barrel or at the electrical switch? or maybe even the mechanism that moves the rod?
Thread Starter
|
Senior User
Joined: Nov 2003
Posts: 295
Likes: 2
From: Vancouver
sail2244: 
That was exactly it, problem came back this morning, rotated counter clockwise a shade and everything worked. Since this happens when it's cold mornings I suspect that maybe the lock barrel is not springing from the 'start' to 'run' positions.
BTW, my blown fuse was an unrelated problem
That was exactly it, problem came back this morning, rotated counter clockwise a shade and everything worked. Since this happens when it's cold mornings I suspect that maybe the lock barrel is not springing from the 'start' to 'run' positions.BTW, my blown fuse was an unrelated problem
Trending Topics
Freshman User
Joined: Mar 2004
Posts: 29
Likes: 0
I think I got it with a swicth & lock tumbler. See a full explanation in my last post in "83 crankshaft sensor". Thanks for all the help & ideas guys!
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
Give me coffee - Or beer!
Joined: Aug 2003
Posts: 746
Likes: 7
From: Who cares?
As to the fuse blowing on the horn and cig lighter, replace the cigaret lighter. Mine was doing exactly the same thing. Bought a new light (this one with a lighted bezel) and the problem was solved. Seems that corrrosion between the inner sleeve and the outer sleave causes a short which blows out the fuse.
