lift kit
Thread Starter
|
Freshman User
Joined: Mar 2004
Posts: 33
Likes: 0
lift kit
Hey i need to get around my property a little better without scratching up my truck...
I wana get a body lift for my truck even though its 2wd
Anyone have any recommendations?
1992 Ford Ranger 2WD 2.3 L
I wana get a body lift for my truck even though its 2wd
Anyone have any recommendations?
1992 Ford Ranger 2WD 2.3 L
Elder User
Joined: Mar 2004
Posts: 729
Likes: 0
From: Houston
I did a 3" Body lift on my 99' 2x - I can fit 8" wheels and 31x10.50x15's on mine with this set-up. I would suggest shocks as well. Your 92' is a TTB truck, for about the same money as having a body lift installed you should be able to go with 3" lift springs, camber bushings and then either add a block in the rear or an add-a-leaf. You will have to add shocks when you go with a suspsension lift. On my 93' I did this with Sky-Jacker Softride springs and Rancho RS5000 shocks, it was a decent combo.
Waves
Waves
New User
Joined: Mar 2004
Posts: 15
Likes: 0
for a suspension lift, you can just add blocks out back and spacers up front, it'll cost about 70 bucks in parts. It's the alignment that could be an issue though. fpr shocks, you can purchase 4wd shocks too if you wish, or just extend your current shocks using washers or something.
With a body lift, it's not that hard to install, but you dont' need an alignment.
With a body lift, it's not that hard to install, but you dont' need an alignment.
