Specs on a 351m
Thread Starter
|
Tuned
Joined: Mar 2004
Posts: 454
Likes: 0
Specs on a 351m
I have a '78 F150 with a 351m that I would like to build out. I know alot about the outside of this engine, but little about it inside. I know that the bore is 4.0 and the stroke is 3.5, and the CR I think is 8.0:1. I know that the factory rating of HP is 140.
Can anyone give me the stock cam specs? Valve sizes, lifts, etc?
I want to take my stock bottom end and build out the top with a newer cam, carb, heads, and add the Holley 600 that I already have to it. I would like to get these parts that compliment each other and I would like any advice on this.
Thanks :-staun
Can anyone give me the stock cam specs? Valve sizes, lifts, etc?
I want to take my stock bottom end and build out the top with a newer cam, carb, heads, and add the Holley 600 that I already have to it. I would like to get these parts that compliment each other and I would like any advice on this.
Thanks :-staun
