Rusted Cab Interior Panels
Thread Starter
|
New User
Joined: Dec 2003
Posts: 11
Likes: 0
From: Massachusetts
Rusted Cab Interior Panels
The inside roof (between headliner and sliding window of my 77 F150 Explorer regular cab is rusted through. At rubber seal edge the metal lip is gone completely in some places. Any advice on repair of this area? I was thinking of going to a junk yard and cutting this section out of a cab and welding this in place of the rusted areas. Otherwise the cab is very solid. Thanks in advance!
New User
Joined: Aug 2003
Posts: 8
Likes: 0
From: chesterfield,Missouri
I had a similar problem with the front windshield top pass side. When I took the seal off there was no metal there. I cut an old door up and with some hammering bending and trimming made a piece that fit the area and welded it in.
Thread
Thread Starter
Forum
Replies
Last Post
Holehawgg
1948 - 1956 F1, F100 & Larger F-Series Trucks
18
May 21, 2013 12:05 AM
slojet
1961 - 1966 F-100 & Larger F-Series Trucks
5
Feb 24, 2011 09:32 AM
79 f-150 guy
1961 - 1966 F-100 & Larger F-Series Trucks
5
Dec 30, 2009 10:17 PM
